AUS BIZ BENCHMARKS

ANZSIC subdivision 22

Fabricated Metal Product Manufacturing businesses in Australia

There were 17,037 fabricated metal product manufacturing businesses operating in Australia at 30 June 2025, 18.8% of the manufacturing division. In 2024-25 the subdivision recorded 2,117 entries and 2,048 exits, an entry rate of 12.5% and an exit rate of 12.1%. 67.8% of the businesses operating in June 2021 were still operating four years later.

1.0 Counts, entries and exits

Table 1 Fabricated Metal Product Manufacturing: businesses operating, with entries and exits during 2024-25
AtBusinessesEntries in yearExits in yearNet change
June 202316,587
June 202416,968
June 202517,0372,1172,048+69

Source: ABS, Counts of Australian Businesses, July 2021 to June 2025, data cube 2. National figures are the sum of the industry classes in the subdivision.

The fabricated metal product manufacturing count grew by 69 (0.4%) over 2024-25. Entry and exit rates for fabricated metal product manufacturing were almost level. Against the wider manufacturing division, its entry rate was 12.5% (division 12.3%) and its exit rate 12.1% (division 12.2%). Since June 2023 the fabricated metal product manufacturing count has changed by +450.

2.0 Survival

Of the 15,308 fabricated metal product manufacturing businesses operating in June 2021, 10,382 were still operating in June 2025, a four-year survival rate of 67.8%, 1.0 points better than the manufacturing division (66.8%).

Table 2 Fabricated Metal Product Manufacturing: survival of businesses operating in June 2021
CohortJune 2022June 2023June 2024June 2025
Operating in June 2021 (15,308)89.3%81.0%74.2%67.8%
Manufacturing division89.2%80.2%73.1%66.8%
All industries87.3%77.1%69.4%63.1%

Source: ABS data cube 4, summed across states and territories; perturbed cells mean small differences from published totals.

Figure 1 Fabricated Metal Product Manufacturing: share of June 2021 businesses still operating in June 2025, by employment size at June 2021
Non employing54.0%1 to 4 employees71.5%5 to 19 employees83.6%20 to 199 employees90.6%

Size at the start matters more than anything else in these tables: in fabricated metal product manufacturing, 54.0% of non employing businesses lasted the four years against 90.6% of those with 20 to 199 employees, a gap of 36.6 points.

Start-ups have a harder run: of 2,430 entries to fabricated metal product manufacturing in 2021-22, 78.9% were operating a year on and 52.8% after three years, where the all-industries figure for that cohort was 48.0%.

3.0 Size of business

Table 3 Fabricated Metal Product Manufacturing businesses by employment size, June 2025
Employment sizeBusinessesShareManufacturing share
Non employing7,66445.0%47.3%
1 to 4 employees5,38031.6%27.7%
5 to 19 employees2,90617.1%17.1%
20 to 199 employees1,0336.1%7.3%
200 or more employees560.3%0.6%

Source: ABS, Counts of Australian Businesses, June 2025 detail. Cells are perturbed by the ABS, so shares are calculated on the sum of the cells shown.

45.0% of fabricated metal product manufacturing businesses had no employees at June 2025, 2.3 percentage points below the manufacturing share. Employers with 20 or more staff number 1,089, or 6.4% of all fabricated metal product manufacturing businesses.

Table 4 Fabricated Metal Product Manufacturing businesses by annual turnover, June 2025
TurnoverBusinessesShareManufacturing share
Under A$50,0002,47014.5%18.8%
A$50,000 to under A$200,0004,83228.4%25.7%
A$200,000 to under A$2 million6,83040.1%37.9%
A$2 million to under A$5 million1,5429.1%8.5%
A$5 million to under A$10 million6413.8%3.7%
A$10 million or more7224.2%5.4%

The most common turnover band for fabricated metal product manufacturing is A$200,000 to under A$2 million, holding 40.1% of businesses. 42.9% of fabricated metal product manufacturing businesses turn over less than A$200,000 a year, against 44.5% for manufacturing, and 17.1% report A$2 million or more.

4.0 By state and territory

Table 5 Fabricated Metal Product Manufacturing businesses by state and territory, June 2025
State or territoryBusinessesShare of industryShare of all businessesEntry rate 2024-25
New South Wales5,48732.2%33.6%12.9%
Victoria3,99823.5%27.7%11.2%
Queensland3,66321.5%19.2%12.7%
South Australia1,0556.2%6.2%9.3%
Western Australia2,24213.2%9.8%15.3%
Tasmania3462.0%1.6%10.2%
Northern Territory1340.8%0.6%10.6%
Australian Capital Territory1070.6%1.4%11.2%

Entry rate: entries during 2024-25 divided by businesses operating at the start of the year. n/a where the base is under 100 businesses.

New South Wales has the most fabricated metal product manufacturing businesses, 32.2% of the national count. Relative to each state's overall business population, fabricated metal product manufacturing is most concentrated in Western Australia (13.2% of the industry against 9.8% of all businesses) and thinnest in Victoria (23.5% against 27.7%).

5.0 Industry classes in this subdivision

Table 6 Classes within Fabricated Metal Product Manufacturing, June 2025
ClassANZSICBusinessesShareEntry rateExit rate
Other Fabricated Metal Product Manufacturing n.e.c.22994,85928.5%13.1%13.5%
Structural Steel Fabricating22212,17012.7%11.1%11.0%
Prefabricated Metal Building Manufacturing22221,91511.2%18.7%12.7%
Boiler, Tank and Other Heavy Gauge Metal Container Manufacturing22311,6869.9%15.7%13.6%
Other Structural Metal Product Manufacturing22291,5559.1%11.9%12.0%
Architectural Aluminium Product Manufacturing22231,5499.1%10.7%11.8%
Metal Coating and Finishing22931,4358.4%9.3%10.0%
Sheet Metal Product Manufacturing (except Metal Structural and Container22409775.7%6.4%8.3%
Spring and Wire Product Manufacturing22913061.8%8.1%9.1%
Other Metal Container Manufacturing22392241.3%16.4%14.2%
Iron and Steel Forging22101250.7%6.2%10.0%
Nut, Bolt, Screw and Rivet Manufacturing22921220.7%7.4%6.6%
Metal Roof and Guttering Manufacturing (except Aluminium)22241140.7%10.7%16.5%

Other Fabricated Metal Product Manufacturing n.e.c. is the largest class with 4,859 businesses. The fastest growing class in the subdivision over 2024-25 was prefabricated metal building manufacturing, where the count changed by +6.0%.

Other subdivisions of Manufacturing: Food Product Manufacturing, Beverage and Tobacco Product Manufacturing, Textile, Leather, Clothing and Footwear Manufacturing, Wood Product Manufacturing, Pulp, Paper and Converted Paper Product Manufacturing, Printing (including the Reproduction of Recorded Media), Petroleum and Coal Product Manufacturing, Basic Chemical and Chemical Product Manufacturing, Polymer Product and Rubber Product Manufacturing, Non-Metallic Mineral Product Manufacturing, Primary Metal and Metal Product Manufacturing, Transport Equipment Manufacturing, Machinery and Equipment Manufacturing, Furniture and Other Manufacturing.

6.0 Income and wages

On the ABS Australian Industry measure for 2024-25, fabricated metal product manufacturing employed 114,800 people at the end of June and earned A$44.2 billion in sales and service income. Wages and salaries were A$8.8 billion (19.9% of sales income) and operating profit before tax was A$4.7 billion.

7.0 Questions on these figures

7.1 How many fabricated metal product manufacturing businesses are there in Australia?

The ABS counted 17,037 at 30 June 2025, of which 7,664 (45.0%) had no employees.

7.2 What is the survival rate for fabricated metal product manufacturing businesses?

67.8% of fabricated metal product manufacturing businesses operating in June 2021 were still operating in June 2025; after one year the figure was 89.3%.

7.3 Where are fabricated metal product manufacturing businesses concentrated?

New South Wales has the largest number (5,487 at June 2025), which is 32.2% of the national total.

8.0 Sources

  1. Australian Bureau of Statistics, Australian Industry, 2024-25 financial year (released June 2026). abs.gov.au Licence: CC BY 4.0.
  2. Australian Bureau of Statistics, Counts of Australian Businesses, including Entries and Exits, July 2021 to June 2025, data cubes 1 to 5 (detail released December 2025). abs.gov.au Licence: CC BY 4.0.

Compiled November 2026. Figures are reproduced or calculated from the sources listed; the publishing agency is the authority if anything here differs from its own release. Report an error.