AUS BIZ BENCHMARKS

ANZSIC subdivision 14

Wood Product Manufacturing businesses in Australia

There were 6,352 wood product manufacturing businesses operating in Australia at 30 June 2025, 7.0% of the manufacturing division. In 2024-25 the subdivision recorded 743 entries and 742 exits, an entry rate of 11.7% and an exit rate of 11.7%. 67.9% of the businesses operating in June 2021 were still operating four years later.

1.0 Counts, entries and exits

Table 1 Wood Product Manufacturing: businesses operating, with entries and exits during 2024-25
AtBusinessesEntries in yearExits in yearNet change
June 20236,320
June 20246,350
June 20256,352743742+2

Source: ABS, Counts of Australian Businesses, July 2021 to June 2025, data cube 2. National figures are the sum of the industry classes in the subdivision.

The wood product manufacturing count grew by 2 (0.0%) over 2024-25. Entry and exit rates for wood product manufacturing were almost level. Against the wider manufacturing division, its entry rate was 11.7% (division 12.3%) and its exit rate 11.7% (division 12.2%). Since June 2023 the wood product manufacturing count has changed by +32.

2.0 Survival

Of the 6,164 wood product manufacturing businesses operating in June 2021, 4,187 were still operating in June 2025, a four-year survival rate of 67.9%, 1.1 points better than the manufacturing division (66.8%).

Table 2 Wood Product Manufacturing: survival of businesses operating in June 2021
CohortJune 2022June 2023June 2024June 2025
Operating in June 2021 (6,164)90.1%80.9%74.2%67.9%
Manufacturing division89.2%80.2%73.1%66.8%
All industries87.3%77.1%69.4%63.1%

Source: ABS data cube 4, summed across states and territories; perturbed cells mean small differences from published totals.

Figure 1 Wood Product Manufacturing: share of June 2021 businesses still operating in June 2025, by employment size at June 2021
Non employing54.8%1 to 4 employees70.4%5 to 19 employees85.3%20 to 199 employees86.5%

Size at the start matters more than anything else in these tables: in wood product manufacturing, 54.8% of non employing businesses lasted the four years against 86.5% of those with 20 to 199 employees, a gap of 31.7 points.

Start-ups have a harder run: of 776 entries to wood product manufacturing in 2021-22, 78.9% were operating a year on and 51.9% after three years, where the all-industries figure for that cohort was 48.0%.

3.0 Size of business

Table 3 Wood Product Manufacturing businesses by employment size, June 2025
Employment sizeBusinessesShareManufacturing share
Non employing2,96746.7%47.3%
1 to 4 employees1,81728.6%27.7%
5 to 19 employees1,13417.9%17.1%
20 to 199 employees4136.5%7.3%
200 or more employees200.3%0.6%

Source: ABS, Counts of Australian Businesses, June 2025 detail. Cells are perturbed by the ABS, so shares are calculated on the sum of the cells shown.

46.7% of wood product manufacturing businesses had no employees at June 2025, which is close to the 47.3% for manufacturing. Employers with 20 or more staff number 433, or 6.8% of all wood product manufacturing businesses.

Table 4 Wood Product Manufacturing businesses by annual turnover, June 2025
TurnoverBusinessesShareManufacturing share
Under A$50,00093314.7%18.8%
A$50,000 to under A$200,0001,71527.0%25.7%
A$200,000 to under A$2 million2,49239.2%37.9%
A$2 million to under A$5 million66110.4%8.5%
A$5 million to under A$10 million2834.5%3.7%
A$10 million or more2684.2%5.4%

The most common turnover band for wood product manufacturing is A$200,000 to under A$2 million, holding 39.2% of businesses. 41.7% of wood product manufacturing businesses turn over less than A$200,000 a year, against 44.5% for manufacturing, and 19.1% report A$2 million or more.

4.0 By state and territory

Table 5 Wood Product Manufacturing businesses by state and territory, June 2025
State or territoryBusinessesShare of industryShare of all businessesEntry rate 2024-25
New South Wales2,24835.4%33.6%12.1%
Victoria1,75427.7%27.7%13.6%
Queensland1,20319.0%19.2%10.9%
South Australia3725.9%6.2%8.0%
Western Australia5428.5%9.8%9.6%
Tasmania1472.3%1.6%6.4%
Northern Territory260.4%0.6%n/a
Australian Capital Territory500.8%1.4%n/a

Entry rate: entries during 2024-25 divided by businesses operating at the start of the year. n/a where the base is under 100 businesses.

New South Wales has the most wood product manufacturing businesses, 35.4% of the national count. Relative to each state's overall business population, wood product manufacturing is most concentrated in New South Wales (35.4% of the industry against 33.6% of all businesses) and thinnest in Western Australia (8.5% against 9.8%).

5.0 Industry classes in this subdivision

Table 6 Classes within Wood Product Manufacturing, June 2025
ClassANZSICBusinessesShareEntry rateExit rate
Wooden Structural Fitting and Component Manufacturing14924,59572.3%12.9%11.9%
Other Wood Product Manufacturing n.e.c.149971911.3%10.6%12.9%
Log Sawmilling14115368.4%4.4%6.9%
Timber Resawing and Dressing14132133.4%10.4%14.0%
Prefabricated Wooden Building Manufacturing14911482.3%11.9%13.9%
Reconstituted Wood Product Manufacturing1494590.9%n/an/a
Wood Chipping1412430.7%n/an/a
Veneer and Plywood Manufacturing1493390.6%n/an/a

Wooden Structural Fitting and Component Manufacturing is the largest class with 4,595 businesses. The fastest growing class in the subdivision over 2024-25 was wooden structural fitting and component manufacturing, where the count changed by +0.9%.

Other subdivisions of Manufacturing: Food Product Manufacturing, Beverage and Tobacco Product Manufacturing, Textile, Leather, Clothing and Footwear Manufacturing, Pulp, Paper and Converted Paper Product Manufacturing, Printing (including the Reproduction of Recorded Media), Petroleum and Coal Product Manufacturing, Basic Chemical and Chemical Product Manufacturing, Polymer Product and Rubber Product Manufacturing, Non-Metallic Mineral Product Manufacturing, Primary Metal and Metal Product Manufacturing, Fabricated Metal Product Manufacturing, Transport Equipment Manufacturing, Machinery and Equipment Manufacturing, Furniture and Other Manufacturing.

6.0 Income and wages

On the ABS Australian Industry measure for 2024-25, wood product manufacturing employed 47,800 people at the end of June and earned A$17.3 billion in sales and service income. Wages and salaries were A$3.4 billion (19.7% of sales income) and operating profit before tax was A$1.7 billion.

7.0 Questions on these figures

7.1 How many wood product manufacturing businesses are there in Australia?

The ABS counted 6,352 at 30 June 2025, of which 2,967 (46.7%) had no employees.

7.2 What is the survival rate for wood product manufacturing businesses?

67.9% of wood product manufacturing businesses operating in June 2021 were still operating in June 2025; after one year the figure was 90.1%.

7.3 Where are wood product manufacturing businesses concentrated?

New South Wales has the largest number (2,248 at June 2025), which is 35.4% of the national total.

8.0 Sources

  1. Australian Bureau of Statistics, Australian Industry, 2024-25 financial year (released June 2026). abs.gov.au Licence: CC BY 4.0.
  2. Australian Bureau of Statistics, Counts of Australian Businesses, including Entries and Exits, July 2021 to June 2025, data cubes 1 to 5 (detail released December 2025). abs.gov.au Licence: CC BY 4.0.

Compiled November 2026. Figures are reproduced or calculated from the sources listed; the publishing agency is the authority if anything here differs from its own release. Report an error.