AUS BIZ BENCHMARKS

ANZSIC subdivision 21

Primary Metal and Metal Product Manufacturing businesses in Australia

There were 1,749 primary metal and metal product manufacturing businesses operating in Australia at 30 June 2025, 1.9% of the manufacturing division. In 2024-25 the subdivision recorded 156 entries and 188 exits, an entry rate of 8.8% and an exit rate of 10.6%. 73.1% of the businesses operating in June 2021 were still operating four years later.

1.0 Counts, entries and exits

Table 1 Primary Metal and Metal Product Manufacturing: businesses operating, with entries and exits during 2024-25
AtBusinessesEntries in yearExits in yearNet change
June 20231,812
June 20241,780
June 20251,749156188-31

Source: ABS, Counts of Australian Businesses, July 2021 to June 2025, data cube 2. National figures are the sum of the industry classes in the subdivision.

The primary metal and metal product manufacturing count fell by 31 (1.7%) over 2024-25. Exits from primary metal and metal product manufacturing ran 1.8 points ahead of entries. Against the wider manufacturing division, its entry rate was 8.8% (division 12.3%) and its exit rate 10.6% (division 12.2%). Since June 2023 the primary metal and metal product manufacturing count has changed by -63.

2.0 Survival

Of the 1,823 primary metal and metal product manufacturing businesses operating in June 2021, 1,333 were still operating in June 2025, a four-year survival rate of 73.1%, 6.3 points better than the manufacturing division (66.8%).

Table 2 Primary Metal and Metal Product Manufacturing: survival of businesses operating in June 2021
CohortJune 2022June 2023June 2024June 2025
Operating in June 2021 (1,823)91.4%84.4%79.3%73.1%
Manufacturing division89.2%80.2%73.1%66.8%
All industries87.3%77.1%69.4%63.1%

Source: ABS data cube 4, summed across states and territories; perturbed cells mean small differences from published totals.

Figure 1 Primary Metal and Metal Product Manufacturing: share of June 2021 businesses still operating in June 2025, by employment size at June 2021
Non employing58.1%1 to 4 employees74.2%5 to 19 employees85.2%20 to 199 employees92.6%

Size at the start matters more than anything else in these tables: in primary metal and metal product manufacturing, 58.1% of non employing businesses lasted the four years against 92.6% of those with 20 to 199 employees, a gap of 34.5 points.

Start-ups have a harder run: of 169 entries to primary metal and metal product manufacturing in 2021-22, 75.7% were operating a year on and 52.7% after three years, where the all-industries figure for that cohort was 48.0%.

3.0 Size of business

Table 3 Primary Metal and Metal Product Manufacturing businesses by employment size, June 2025
Employment sizeBusinessesShareManufacturing share
Non employing68839.4%47.3%
1 to 4 employees47627.3%27.7%
5 to 19 employees36020.6%17.1%
20 to 199 employees19411.1%7.3%
200 or more employees271.5%0.6%

Source: ABS, Counts of Australian Businesses, June 2025 detail. Cells are perturbed by the ABS, so shares are calculated on the sum of the cells shown.

39.4% of primary metal and metal product manufacturing businesses had no employees at June 2025, 7.9 percentage points below the manufacturing share. Businesses with five or more employees make up 33.3% of the primary metal and metal product manufacturing count, a larger share than usual (25.0% across manufacturing).

Table 4 Primary Metal and Metal Product Manufacturing businesses by annual turnover, June 2025
TurnoverBusinessesShareManufacturing share
Under A$50,00024814.2%18.8%
A$50,000 to under A$200,00040723.3%25.7%
A$200,000 to under A$2 million60134.4%37.9%
A$2 million to under A$5 million17710.1%8.5%
A$5 million to under A$10 million1035.9%3.7%
A$10 million or more21312.2%5.4%

The most common turnover band for primary metal and metal product manufacturing is A$200,000 to under A$2 million, holding 34.4% of businesses. 37.4% of primary metal and metal product manufacturing businesses turn over less than A$200,000 a year, against 44.5% for manufacturing, and 28.2% report A$2 million or more.

4.0 By state and territory

Table 5 Primary Metal and Metal Product Manufacturing businesses by state and territory, June 2025
State or territoryBusinessesShare of industryShare of all businessesEntry rate 2024-25
New South Wales53830.9%33.6%10.6%
Victoria48427.8%27.7%8.4%
Queensland33919.5%19.2%5.2%
South Australia1126.4%6.2%6.1%
Western Australia22412.9%9.8%9.3%
Tasmania231.3%1.6%n/a
Northern Territory80.5%0.6%n/a
Australian Capital Territory120.7%1.4%n/a

Entry rate: entries during 2024-25 divided by businesses operating at the start of the year. n/a where the base is under 100 businesses.

New South Wales has the most primary metal and metal product manufacturing businesses, 30.9% of the national count. Relative to each state's overall business population, primary metal and metal product manufacturing is most concentrated in Western Australia (12.9% of the industry against 9.8% of all businesses) and thinnest in New South Wales (30.9% against 33.6%).

5.0 Industry classes in this subdivision

Table 6 Classes within Primary Metal and Metal Product Manufacturing, June 2025
ClassANZSICBusinessesShareEntry rateExit rate
Iron Smelting and Steel Manufacturing211099757.0%8.1%9.6%
Iron and Steel Casting21211749.9%10.6%13.4%
Steel Pipe and Tube Manufacturing21221478.4%7.7%13.5%
Other Basic Non-Ferrous Metal Manufacturing21391317.5%10.6%11.4%
Aluminium Rolling, Drawing, Extruding2142724.1%n/an/a
Other Basic Non-Ferrous Metal Product Manufacturing2149693.9%n/an/a
Non-Ferrous Metal Casting2141533.0%n/an/a
Copper, Silver, Lead and Zinc Smelting and Refining2133442.5%n/an/a
Aluminium Smelting2132432.5%n/an/a
Alumina Production2131191.1%n/an/a

Iron Smelting and Steel Manufacturing is the largest class with 997 businesses. The fastest growing class in the subdivision over 2024-25 was iron smelting and steel manufacturing, where the count changed by -1.5%.

Other subdivisions of Manufacturing: Food Product Manufacturing, Beverage and Tobacco Product Manufacturing, Textile, Leather, Clothing and Footwear Manufacturing, Wood Product Manufacturing, Pulp, Paper and Converted Paper Product Manufacturing, Printing (including the Reproduction of Recorded Media), Petroleum and Coal Product Manufacturing, Basic Chemical and Chemical Product Manufacturing, Polymer Product and Rubber Product Manufacturing, Non-Metallic Mineral Product Manufacturing, Fabricated Metal Product Manufacturing, Transport Equipment Manufacturing, Machinery and Equipment Manufacturing, Furniture and Other Manufacturing.

6.0 Income and wages

On the ABS Australian Industry measure for 2024-25, primary metal and metal product manufacturing employed 40,100 people at the end of June and earned A$93.4 billion in sales and service income. Wages and salaries were A$5.0 billion (5.3% of sales income) and operating profit before tax was A$1.2 billion.

7.0 Questions on these figures

7.1 How many primary metal and metal product manufacturing businesses are there in Australia?

The ABS counted 1,749 at 30 June 2025, of which 688 (39.4%) had no employees.

7.2 What is the survival rate for primary metal and metal product manufacturing businesses?

73.1% of primary metal and metal product manufacturing businesses operating in June 2021 were still operating in June 2025; after one year the figure was 91.4%.

7.3 Where are primary metal and metal product manufacturing businesses concentrated?

New South Wales has the largest number (538 at June 2025), which is 30.8% of the national total.

8.0 Sources

  1. Australian Bureau of Statistics, Australian Industry, 2024-25 financial year (released June 2026). abs.gov.au Licence: CC BY 4.0.
  2. Australian Bureau of Statistics, Counts of Australian Businesses, including Entries and Exits, July 2021 to June 2025, data cubes 1 to 5 (detail released December 2025). abs.gov.au Licence: CC BY 4.0.

Compiled November 2026. Figures are reproduced or calculated from the sources listed; the publishing agency is the authority if anything here differs from its own release. Report an error.