ANZSIC subdivision 19
Polymer Product and Rubber Product Manufacturing businesses in Australia
There were 3,052 polymer product and rubber product manufacturing businesses operating in Australia at 30 June 2025, 3.4% of the manufacturing division. In 2024-25 the subdivision recorded 320 entries and 306 exits, an entry rate of 10.5% and an exit rate of 10.1%. 71.1% of the businesses operating in June 2021 were still operating four years later.
1.0 Counts, entries and exits
| At | Businesses | Entries in year | Exits in year | Net change |
|---|---|---|---|---|
| June 2023 | 3,096 | |||
| June 2024 | 3,038 | |||
| June 2025 | 3,052 | 320 | 306 | +14 |
Source: ABS, Counts of Australian Businesses, July 2021 to June 2025, data cube 2. National figures are the sum of the industry classes in the subdivision.
The polymer product and rubber product manufacturing count grew by 14 (0.5%) over 2024-25. Entry and exit rates for polymer product and rubber product manufacturing were almost level. Against the wider manufacturing division, its entry rate was 10.5% (division 12.3%) and its exit rate 10.1% (division 12.2%). Since June 2023 the polymer product and rubber product manufacturing count has changed by -44.
2.0 Survival
Of the 3,020 polymer product and rubber product manufacturing businesses operating in June 2021, 2,147 were still operating in June 2025, a four-year survival rate of 71.1%, 4.3 points better than the manufacturing division (66.8%).
| Cohort | June 2022 | June 2023 | June 2024 | June 2025 |
|---|---|---|---|---|
| Operating in June 2021 (3,020) | 91.0% | 83.7% | 76.7% | 71.1% |
| Manufacturing division | 89.2% | 80.2% | 73.1% | 66.8% |
| All industries | 87.3% | 77.1% | 69.4% | 63.1% |
Source: ABS data cube 4, summed across states and territories; perturbed cells mean small differences from published totals.
Size at the start matters more than anything else in these tables: in polymer product and rubber product manufacturing, 56.0% of non employing businesses lasted the four years against 91.6% of those with 20 to 199 employees, a gap of 35.6 points.
Start-ups have a harder run: of 329 entries to polymer product and rubber product manufacturing in 2021-22, 78.4% were operating a year on and 52.3% after three years, where the all-industries figure for that cohort was 48.0%.
3.0 Size of business
| Employment size | Businesses | Share | Manufacturing share |
|---|---|---|---|
| Non employing | 1,318 | 43.2% | 47.3% |
| 1 to 4 employees | 736 | 24.1% | 27.7% |
| 5 to 19 employees | 590 | 19.3% | 17.1% |
| 20 to 199 employees | 385 | 12.6% | 7.3% |
| 200 or more employees | 23 | 0.8% | 0.6% |
Source: ABS, Counts of Australian Businesses, June 2025 detail. Cells are perturbed by the ABS, so shares are calculated on the sum of the cells shown.
43.2% of polymer product and rubber product manufacturing businesses had no employees at June 2025, 4.1 percentage points below the manufacturing share. Businesses with five or more employees make up 32.7% of the polymer product and rubber product manufacturing count, a larger share than usual (25.0% across manufacturing).
| Turnover | Businesses | Share | Manufacturing share |
|---|---|---|---|
| Under A$50,000 | 539 | 17.7% | 18.8% |
| A$50,000 to under A$200,000 | 628 | 20.6% | 25.7% |
| A$200,000 to under A$2 million | 1,030 | 33.7% | 37.9% |
| A$2 million to under A$5 million | 350 | 11.5% | 8.5% |
| A$5 million to under A$10 million | 194 | 6.4% | 3.7% |
| A$10 million or more | 311 | 10.2% | 5.4% |
The most common turnover band for polymer product and rubber product manufacturing is A$200,000 to under A$2 million, holding 33.7% of businesses. 38.2% of polymer product and rubber product manufacturing businesses turn over less than A$200,000 a year, against 44.5% for manufacturing, and 28.0% report A$2 million or more.
4.0 By state and territory
| State or territory | Businesses | Share of industry | Share of all businesses | Entry rate 2024-25 |
|---|---|---|---|---|
| New South Wales | 861 | 28.3% | 33.6% | 11.4% |
| Victoria | 923 | 30.4% | 27.7% | 9.8% |
| Queensland | 650 | 21.4% | 19.2% | 10.6% |
| South Australia | 207 | 6.8% | 6.2% | 5.6% |
| Western Australia | 314 | 10.3% | 9.8% | 13.0% |
| Tasmania | 57 | 1.9% | 1.6% | n/a |
| Northern Territory | 13 | 0.4% | 0.6% | n/a |
| Australian Capital Territory | 14 | 0.5% | 1.4% | n/a |
Entry rate: entries during 2024-25 divided by businesses operating at the start of the year. n/a where the base is under 100 businesses.
Victoria has the most polymer product and rubber product manufacturing businesses, 30.4% of the national count. Relative to each state's overall business population, polymer product and rubber product manufacturing is most concentrated in Queensland (21.4% of the industry against 19.2% of all businesses) and thinnest in New South Wales (28.3% against 33.6%).
5.0 Industry classes in this subdivision
| Class | ANZSIC | Businesses | Share | Entry rate | Exit rate |
|---|---|---|---|---|---|
| Rigid and Semi-Rigid Polymer Product Manufacturing | 1912 | 1,258 | 41.2% | 10.3% | 9.4% |
| Other Polymer Product Manufacturing | 1919 | 850 | 27.9% | 12.0% | 10.7% |
| Paint and Coatings Manufacturing | 1916 | 339 | 11.1% | 11.9% | 8.3% |
| Polymer Film and Sheet Packaging Material Manufacturing | 1911 | 247 | 8.1% | 7.5% | 9.5% |
| Natural Rubber Product Manufacturing | 1920 | 130 | 4.3% | 6.8% | 8.3% |
| Polymer Foam Product Manufacturing | 1913 | 114 | 3.7% | 12.1% | 13.8% |
| Tyre Manufacturing | 1914 | 68 | 2.2% | n/a | n/a |
| Adhesive Manufacturing | 1915 | 46 | 1.5% | n/a | n/a |
Rigid and Semi-Rigid Polymer Product Manufacturing is the largest class with 1,258 businesses. The fastest growing class in the subdivision over 2024-25 was paint and coatings manufacturing, where the count changed by +3.7%.
Other subdivisions of Manufacturing: Food Product Manufacturing, Beverage and Tobacco Product Manufacturing, Textile, Leather, Clothing and Footwear Manufacturing, Wood Product Manufacturing, Pulp, Paper and Converted Paper Product Manufacturing, Printing (including the Reproduction of Recorded Media), Petroleum and Coal Product Manufacturing, Basic Chemical and Chemical Product Manufacturing, Non-Metallic Mineral Product Manufacturing, Primary Metal and Metal Product Manufacturing, Fabricated Metal Product Manufacturing, Transport Equipment Manufacturing, Machinery and Equipment Manufacturing, Furniture and Other Manufacturing.
6.0 Income and wages
On the ABS Australian Industry measure for 2024-25, polymer product and rubber product manufacturing employed 40,900 people at the end of June and earned A$18.7 billion in sales and service income. Wages and salaries were A$3.5 billion (18.7% of sales income) and operating profit before tax was A$1.1 billion.
7.0 Questions on these figures
7.1 How many polymer product and rubber product manufacturing businesses are there in Australia?
The ABS counted 3,052 at 30 June 2025, of which 1,318 (43.2%) had no employees.
7.2 What is the survival rate for polymer product and rubber product manufacturing businesses?
71.1% of polymer product and rubber product manufacturing businesses operating in June 2021 were still operating in June 2025; after one year the figure was 91.0%.
7.3 Where are polymer product and rubber product manufacturing businesses concentrated?
Victoria has the largest number (923 at June 2025), which is 30.2% of the national total.
8.0 Sources
- Australian Bureau of Statistics, Australian Industry, 2024-25 financial year (released June 2026). abs.gov.au Licence: CC BY 4.0.
- Australian Bureau of Statistics, Counts of Australian Businesses, including Entries and Exits, July 2021 to June 2025, data cubes 1 to 5 (detail released December 2025). abs.gov.au Licence: CC BY 4.0.
Compiled November 2026. Figures are reproduced or calculated from the sources listed; the publishing agency is the authority if anything here differs from its own release. Report an error.